Speed: 20 MPH / Range: 12-30 miles
Charging Time 2 Hours 45 Minutes with 3.5amp Charger
The E-BikeKit™ Complete Conversion System offers the ultimate electric bicycle conversion solution. The complete system has everything you need "out of the box" to convert your conventional bike into a high-quality electric bike.
The Complete System Includes Both the E-BikeKit™ Conversion Kit and the E-BikeKit™ brand LiFePo4 battery and charger.
With this system you can expect to go from 12-30 miles on a full charge depending on the weight of the rider, the amount of pedaling and the route.
This complete conversion system with LiFePO4 battery pack offers both e-bike novices and experienced electric bicycle riders safety, power, convenience and reliability. Engineered to comply with USA Federal guidelines the E-BikeKit™ system is "Dealer Friendly" and requires no insurance or licensing in most states. If you are deciding whether to convert your existing bike or to buy a complete electric bike you should know that bikes converted with the E-BikeKit™ Complete Conversion System are comparable to complete electric bikes costing more than $2500. The E-BikeKit™ Complete Conversion System is simply the best conversion system available.
PLEASE NOTE: Front wheel conversions require a bike with steel forks.
Front Wheel: w/ 500-750 Watt Brushless Hub Motor
Rim:Flat profile double-walled
Spokes: 13 Gauge
Hub Weight: 14 Pounds
Hub Width: 85mm / 3.35 Inches (requires standard 100mm width between fork dropouts)
Top Speed: 20 MPH
Power/Torque: 36V/500W/430 RPM No Load
Range: 12-30 Miles
**All dependent on battery type, weight of rider, amount of pedaling, route and weather conditions.
E-BikeKit™ Conversion Kit Includes:
1 x Front Wheel w/ 500-750 Watt Brushless Hub Motor
1 x 36 Volt 22 Amp Intelligent Motor Controller (works w/ any 36v or 48v battery pack)
1 x Twist or Thumb Throttle & Matching Grip
2 x E-Brake Handles w/ Electric Cutoff Switches
1 x Battery Harness Wire (for connecting any 36v or 48v battery)
1 x Universal Stainless Steel Torque Arm (a must have for safety)
15 x Black Zip Ties (3 sizes for neatly securing wiring to the frame)
1 x 2.5mm Metric Hex Key (to mount the throttle)
1 x E-Bike Spoke Wrench
1 x Owner's Manual & Installation Instructions
1 x E-BikeKit™ T-Shirt
*Standard Anderson Powerpole 30Amp Connectors
E-BikeKit™ 9AH LiFePo4 Battery & 2.0 Amp Charger Standard:
1 x Smart Charger (Constant Current 2.0A – Constant Voltage 43.6V)
1 x 14 AWG battery wire harness
Battery Weight: 9 Pounds
Industry Leading 18 Month Warranty
LiFePo4 Battery Packs are warranted for a period of 1 Year or 18 months from the date of purchase depending on the battery purchased. A pack will be deemed defective if it fails to deliver 80% of nominal capacity within 1 year of purchase when discharged at 1.5C with a static resistive load following full charge with an approved charger. The E-BikeKit™ 36v 10ah Prismatic LiFePo4 will be deemed defective if it fails to deliver any discharge within 12-18 months of purchase when discharged at 1.5C with a static resistive load following full charge with an approved charger.